NOT FINDING WHAT
Please email us at email@example.com and
let us know if you have a
question, comment, etc. We
will then contact you with
the information you need.
SC06 Industry Space Selection and Conference Information
SC06 Space Selection Meeting
AT: SC|05: High Performance
Networking and Computing – Seattle,
WHERE: Room 204, Washington State Convention and Trade Center
WHEN: Industry - Wednesday, November 16, 2005
Time slot based on priority points
- SC06 Conference and Exhibition will be held in Tampa, FL, Tampa
- SC06 Conference dates are November 12 - 17, 2006
- SC06 Exhibition dates are November 14 - 16, 2006
- Contracts for space will
be accepted and space assignments will be made according to Priority Points,
which are based on the Exhibitor's number of continuous years exhibiting
at SC and the size booths that were purchased in those consecutive years
- Priority Point information will be available on-site in the SC06 Sales
Office (Room 504) in the Washington State Convention & Trade Center, and
will also be distributed during the Space Selection Meeting.
Review all of the following information:
Return your Exhibitor's Contract for space to SC06 Sales
Office (Room 504), Washington State Convention & Trade Center, prior to
5:00pm, Tuesday, November 15, 2005 or at the SC06 Space Selection Meeting,
which begins at 11:00am on Wednesday, November 16, 2005.
If you cannot attend and wish to select a space for your company,
you should complete the Exhibitor's Contract with your booth preferences
and submit it to the Exhibition Management Office prior to 5:00pm on Tuesday,
November 15, 2005. Exhibition Management will assign space according to space
available, priority points, and your booth location preferences.
If attending in person, please arrive at the Space Selection Meeting at least 15 minutes prior to your scheduled time in order to review current space assignments. Select your exhibit space when your company name is called. After you have selected your space, you must turn in your signed contract to SC06 Exhibition Management, Hall-Erickson, Inc.
Exhibition Management will send a written verification of the exhibit space assigned to your organization with an invoice for 50% of the total cost of exhibit space. This payment is due January 17, 2006. Late payments may cause Exhibitor to forfeit priority location.
Space Selection Procedures
Companies will select space according to list of total
priority points. Points are rounded
to the nearest hundred. Please refer to the enclosed Priority Point List
to determine your company’s position in the space selection procedure.
Space selections will begin in Room 204, promptly at 11:00am, Wednesday,
November 16, 2005, and will continue based on the following schedule:
900 – 7815
11:00am – Noon
Noon – 1:00pm
56 – 194
1:00pm – 2:00pm
15 – 55
2:00pm – 3:00pm
1 - 14
3:00pm – 4:00pm
Exhibitors selecting a booth for the first time may begin when exhibitors
with priority points have completed their selections.
Priority Points System
- Companies sharing identical total points will be assigned a priority
position based on a drawing during the space selection meeting. The order
of the selection will be announced at that time.
- Each company’s name will be announced. If there is no response,
and if the company has submitted a contract for exhibit space
prior to the space selection meeting, exhibit space will be assigned
by Exhibition Management based on total space requested and general location
as noted on the contract.
- As a result of the growth of the SC Exhibits over the last several
years, the floorplan has been drawn to maximize available exhibit
space. Exhibitors may select booth sizes as shown on the floorplan
or combine certain booths to achieve the desired size. Exhibit space may not be cut.
Certain aisles may not be crossed to create booths as per
the instructions of the Fire Marshall. Exhibitors may select their
SC06 booth size up to the maximum of their 2005 booth size.
- The break at the end of each hour may be utilized by Exhibitors to
make changes who have been allocated space earlier. Such changes
will be made in order of each company’s priority points.
This interval may also be used for the assignment of space to any
Exhibitor whose name had been announced prior to the break, but
was not assigned space because their contract had not been received
by Exhibition Management and the Exhibitor was not present when
their name was called.
- After the Space Selection Meeting, requests for changes in space should
be submitted to Exhibition Management in writing after the
- Financial Responsibility Disclosure: Please check
with your company’s purchasing department to be sure
you have the authority to sign the SC06 space contract, which
is a binding financial contract. Contracting for space at an
SC event creates a binding financial obligation and, at the
time your signed contract is turned in at the meeting, your
company is financially obligated under the terms of the contract
and subject to all the terms and conditions of the contract,
all the stipulated payments, and specified penalties in the
event of cancellation, reduction, or withdrawal from SC06 by
your company. Certain provisions of the contract and time sensitive
and must be observed. See Actual Contract.
The following is a summary of the priority points system established
for SC exhibitions:
Each Exhibitor is given one point for each 100 square feet of space purchased.
The points are totaled for each consecutive year as an Exhibitor with SC. The
total is then multiplied by the number of consecutive years
as an Exhibitor.
Example: Company purchases:
square feet in SC00
square feet in SC01
300 square feet in SC02
square feet in SC03
500 square feet in SC04
square feet in SC|05
square feet (equals 21)
Total of 21 Points, as shown above, multiplied by 6 consecutive years
as an Exhibitor, equals a cumulative Total of 126 Priority Points.
Companies not exhibiting for a year will lose all points accumulated
and upon returning must start again to accumulate points just as a first
Space Reduction or Space Cancellation: Exhibitors who reduce or cancel their
contracted exhibit space after the space selection meeting will be charged a
penalty under the specified terms and conditions of the SC06 Exhibitor's
Financial Responsibility Disclosure: Please check with your
company’s purchasing department to be sure you have the authority to
sign the SC06 space contract, which is a binding financial contract. Contracting
for space at an SC event creates a binding financial obligation and, at the
time your signed contract is turned in at the meeting, your company is financially
obligated under the terms of the contract and subject to all the terms and
conditions of the contract, all the stipulated payments, and specified penalties
in the event of cancellation, reduction, or withdrawal from SC06 by your
company. Certain provisions of the contract and time sensitive and must be
observed. See Actual Contract.
This policy is intended to discourage Exhibitors from “blocking” exhibit
space they may not fully expect to use at the show. This will provide each Exhibitor
with a more accurate picture of space availability at the time of the space selection
This policy is intended to help all Exhibitors by giving each the assurance
that they have received the best booth location possible in a fair and
equitable space selection procedure.